New High-Flow Single-Cartridge Heads with ½-Inch Fittings

For Aqua-Pure Commercial Products - a New High-Flow Head with ½-inch FNPT and FBSP Inlet and Outlet Fittings.

The high-flow head (NH3) for single-cartridge Aqua-Pure Commercial Systems is now supplied with only ½-inch inlet and outlet fittings. Also, all Aqua-Pure Commercial systems with flow rates of 3.34 gal/min (12.64 liters/min) or more are now supplied with the new head. These include all eight Beverage and Ice Systems with Aqua-Pure Commercial HF60 (medium size) and HF90 (large size) cartridges.

(Previously, this head was supplied with 3/8-inch inlet and outlet fittings.)

The new NH3 head means even lower pressure drops and easier installation to inlet and distribution plumbing in a foodservice establishment.

As with the previous version, the new head has a locking key for sanitary quick connect (SQC) cartridges and a red tab to release the lock for fast cartridge change-outs.

The head has a molded mounting bracket, and it may be ordered with or without a pressure gauge. An inlet ball-valve kit is also available as a separate part number.

A complete list of available heads and part numbers is given below. All are ½-inch female inlet and outlet.

 

 

* ½” NPTF with nipple

Revised Spec Sheets now available!

 

Resources

Literature

• Brochures / Other
• Instruction Manuals
• Order Forms

Price Books

Spec Sheets

• CUNO Foodservice
• Aqua-Pure Commercial
• OCS / Vending

Sales Tools

A User Name and Password is required to enter this area of the site.

If you know your User Name and Password, please login.

Sales Tools Login »